It is used to strike slow-moving targets or concentrations of infantry at distances of up to 40+ km, with a warhead weighing up to 9 kg.

The Horror 10" / Horror 8" / Horror 7" UAVs from BlueBird Tech are lightweight and maneuverable FPV kamikaze drones equipped with low-light analog cameras, designed to engage personnel, bunkers, vehicles, motorcycles, and light armored equipment. The flight controller firmware is configured for flights with payloads, allowing the drones to remain controllable even in adverse weather conditions.

The UAVs Horror 15" / Horror 13" from BlueBird Tech are lightweight and maneuverable FPV kamikaze drones equipped with low-light analog cameras, designed to engage personnel, bunkers, vehicles, motorcycles, and light armored equipment. The flight controller firmware is configured for flights with payloads, ensuring that the drones remain controllable even in adverse weather conditions.

Ground control station "Vishchun HC1" (supplied separately): video reception from the drone, reception of drone control through remote antenna modules, and a built-in 19" monitor with DVR.

Complex "Vishchun-K1": professional FPV control. Ground station "Vishchun-HC1" from BlueBird Tech is a modern solution created by experienced engineers for the needs of the front.

The "Chipa" net launcher by BlueBird Tech is a compact, single-use device designed to rapidly intercept FPV drones and small quadcopters at close range. When fired, a folded special net is deployed, which instantly opens in the air and entangles the propellers. As a result, the drone loses the ability to continue flying and either falls or hovers immobilized.

"Genera 1200" charging station: 1344 Wh LiFePO4 power station with 220 V AC output and solar charging input.

Designed for transporting and storing devices/equipment and for other tasks. We provide customized solutions, therefore the technical specifications may vary.

The pneumatic catapult from BlueBird Tech, designed specifically for our "Bebradrone" UAV. Compact and easy to operate, it fits in almost any pickup truck and is smaller than the aircraft itself.

The control panel is designed for centralized power-on and monitoring of the EW system from a 220 V AC power source. It provides simple operation, visual monitoring of key parameters, and safe equipment usage.

Reliable mount specially designed for Chuyka 3.0 and Chuyka 2.0 drone detectors. It provides stable fixation of the device on the chosen surface or structure and withstands active use in field conditions. Its compact design and lightweight construction allow for quick installation and removal without extra effort. This is an ideal solution for mobile units that require secure placement of the Chuyka during combat operations.

Power supply device for EW systems: "Genera-28", 28 V, 1200 Wh LiFePO4 battery in a metal body.

The external antenna for the Chuyka drone detector by BlueBird Tech is a modular, all-weather, high-performance platform whose specifications are optimized to ensure maximum efficiency and stability of the Chuyka electronic intelligence (ELINT) system.

Telescopic aluminum mast: compact when collapsed, quick to deploy and retract, lightweight, and fits easily in a pickup truck bed.

Using the mount allows for timely detection of approaching FPV drones while maintaining the ability to quickly remove the device for use outside the vehicle.

The Kumex antenna is a wideband directional antenna with horizontal linear polarization. The Kumex antenna is optimized to operate in the 2100–2700 MHz frequency range. Thanks to its properties—compact size, wide operating bandwidth, and high structural reliability—the antenna is ideally suited for mobile and stationary electronic warfare (EW) systems.

The Harpina 2.4 GHz antenna by BlueBird Tech is a directional antenna with circular polarization, designed to operate in the 2.4 GHz (2400 MHz) frequency range. The antenna is available in left-hand and right-hand polarization versions, allowing users to choose the optimal configuration for specific tasks.

The Harpina 5.8 GHz antenna by BlueBird Tech is a directional antenna with circular polarization, optimized to operate in the 5.8 GHz (5800 MHz) frequency range. Its high directivity and compact design ensure effective radiation pattern formation for targeted impact on objects.

Omnidirectional wideband antenna. The frequency range is from 1000 to 1700 MHz.

It combines engineering simplicity, minimal load on the carrier, and precise technical specifications required for professional long-range systems.

It is an ideal solution for professional long-range systems, drones, ground repeaters, and tactical radio complexes.

An ultra-light, high-precision helical antenna specifically designed for applications where weight is critical and maximum radio channel stability is required.

The Helix Antenna for 5.8 GHz is a high-performance antenna designed to provide reliable communication and data transmission at the 5.8 GHz frequency. This antenna is ideally suited for professional applications requiring stable, high-quality data transmission over long distances.

This is an omnidirectional antenna for electronic warfare (EW) with a frequency range of 350–450 MHz, 510–600 MHz, 590–700 MHz, 700–820 MHz, 800–920 MHz, and 900–1050 MHz, and a maximum power of 60 W. It features vertical polarization, a gain of 1–3 dBi, and a VSWR of no more than 1.5. The impedance is 50 Ω, and the connector type is N-type male.

The PCB VeeDip 1.2 GHz antenna is a flat V-shaped dipole antenna designed to operate in the 1150–1300 MHz frequency range. Thanks to its compact PCB-based design, the antenna is lightweight, easy to install, and provides high parameter stability within the specified range.

A patch antenna operating in the 1080–1480 MHz range with a gain of 9.5 dBi, designed for transmitting and receiving radio signals.

A patch antenna operating at 5.8 GHz with right-hand circular polarization (RHCP) and a gain of 9.5 dBi is a high-efficiency device designed to ensure reliable wireless communication.

The Quadrifilar antenna NR17 (QHA) with circular polarization (RHCP) operates in the 165–280 MHz range. Thanks to its geometry, the antenna provides an almost spherical radiation pattern with an emphasis on the upper hemisphere, making it an ideal choice for electronic warfare (EW) systems targeting aerial objects such as drones and aircraft.

Quadrifilar antenna components in four frequency versions: 400 MHz, 700 MHz, 800 MHz and 900 MHz.

This antenna provides a directional signal within a specific sector, which is useful for jamming or countering drones. Such antennas are often used in electronic warfare (EW) systems to counter FPV drones, offering protection against drones approaching from various directions and defending against payload drops.

The UYA Lite 915 by BlueBird Tech is an ultra-light, high-efficiency directional Yagi-Uda antenna. It is designed to operate in the 870–1000 MHz frequency range and is optimized for a center frequency of 915 MHz. The main advantage of the Lite version is its minimal weight while maintaining high mechanical rigidity.

The UYA Lite 750 by BlueBird Tech is an ultra-light, high-efficiency directional Yagi-Uda antenna. It is designed to operate in the 720–840 MHz frequency range and is optimized for a center frequency of 750 MHz. The main advantage of the Lite version is its minimal weight while maintaining high mechanical rigidity.

Chuyka 2.0 is an innovative portable drone detector developed by BlueBird Tech in response to the needs of Ukrainian military personnel in modern technological warfare. Designed for individual use, it detects and intercepts the analog video signal from an FPV drone to its operator, with a scanning speed of 4–8 seconds. This allows military personnel to respond to threats in advance and save lives.

Chuyka 3.0 is an FPV analog video signal detector. It performs rapid automatic scanning across the 1.2 GHz, 3.3 GHz, and 5.8 GHz frequency bands. When a signal is detected within the antenna's sensitivity range, the detector triggers audio and visual alarms. Captured video can be displayed on a 3.5-inch screen for further analysis. It also supports reception of the inverse signal (scrambler).

Dome EW backpack "AntiSkid" by BlueBird Tech, jamming the 2.4 GHz and 5.8 GHz ranges with a directional broadband signal.

Trench/Vehicle-Mounted. Options: additional springs for collinear antennas (3 pcs), remote control for turning the device on/off, additional quadrifilar-type antennas (3 pcs).

Trench/Vehicle-Mounted. Remote control for turning the device on/off. There is a possibility of fulfilling custom orders according to technical specifications (other modules, configurations, etc.). Operates from 220V (with sector antennas).

Trench/Vehicle-Mounted. Options: additional springs for collinear antennas (3 pcs), remote control for turning the device on/off, additional quadrifilar-type antennas (3 pcs).

Trench/Vehicle-Mounted. Remote control for turning the device on/off. There is a possibility to fulfill custom orders according to technical specifications (other modules, configurations, etc.). Operates from 220 V (with sector antennas).

Trench/Vehicle-Mounted. Remote control for turning the device on/off. There is a possibility to fulfill custom orders according to technical specifications (other modules, configurations, etc.). Operates from 220 V (with sector antennas).

Trench/Vehicle-Mounted. Remote control for turning the device on and off. Custom orders can be fulfilled according to technical specifications (other modules, configurations, etc.). Operates from 220 V (with sector antennas).

Trench/Vehicle-Mounted. We consider orders based on the client's technical specifications (other modules, designs, etc.).

Trench/Vehicle-Mounted. We consider orders based on the client's technical specifications (other modules, designs, etc.).

The "Hrets 4MC" Anti-Drop is a powerful countermeasure against Mavic-type drones, operating in the 2.4–5.8 GHz range. The device is equipped with four 50 W modules, providing effective suppression of control signals. It can operate both from a 220 V mains supply and from autonomous 20–36 V power sources. The system also features four neodymium magnets for mounting on a vehicle body. Thanks to active cooling, it maintains stable operation even under high loads.

Vehicle-mounted. A powerful tool against FPV drones thanks to its modular design, which allows the installation of required modules.

It combines engineering simplicity, minimal load on the carrier, and precise technical specifications required for professional long-range systems.

The Ukrainian electronic warfare (EW) module from BlueBird Tech is designed to meet modern requirements for reliability, efficiency, and stable operation under combat conditions. Special attention is given to load control: at a VSWR of 1:3, the module maintains full output power, while at 1:6, it automatically reduces power to protect its components.

A simple and proven 4×4 all-wheel-drive ground platform designed to perform reconnaissance, engineering support, or demonstration tasks. Reliable mechanics, high autonomy, and efficient control allow it to operate in conditions where other equipment may fail.

A simple and proven 4×4 all-wheel-drive ground platform, designed for reconnaissance, engineering support, or demonstration tasks. Reliable mechanics, high autonomy, and efficient control allow it to operate in conditions where other equipment may fail.

"Promin-13" by BlueBird Tech is a new generation drone repeater designed to provide stable video and telemetry communication at distances of up to 25 km.

Next-generation drone repeater designed to provide stable video and telemetry communication over distances of up to 25 km.

Repeater "Promin-10" by BlueBird Tech: a drone-carried repeater with a drone and a repeater specification.

Repeater for DJI Mavic: signal reception from the drone and transmission to the operator, powered from a modified Mavic battery.

Ground wireless repeater "Vishchun": receives video from the drone and retransmits it wirelessly to the operator.

We manufacture parts for drones, electronic warfare (EW) systems, antennas, mounts, and other components—quickly, accurately, and reliably.

A certified service center with experience repairing both our products and third-party equipment.